Whether you ship single pieces directly to consumers or hundreds of fish to regional facilities, we can cut your shipping costs by helping you move away from unsustainable EPS coolers.

We’re keenly aware that shipping fish can be difficult. The packing process involves a lot of ice and a lot of hope that said ice holds up while in transit.

EPS coolers have long been the standard in shipping seafood. Let’s face it, they’re cheap and lightweight. But we’ve noticed a few problems with EPS coolers.

First, they take up a lot of warehouse space.
Due to their inefficient design, when they’re not in use, these coolers are still holding a lot of air in your warehouse. TemperPack liners fold flat, meaning you can ship about 8 liners in the space it takes to ship just one EPS cooler.

If they’re dropped, game over.
Let’s face it. Accidents happen. A box falls off a delivery truck, or is mishandled during packing. When a full EPS cooler falls hard enough, it cracks. Cracks mean leaks and leaks in shipping fish is bad. TemperPack liners are soft but durable, meaning if the box they’re shipped in is dropped, they might bend in the corner, but everything inside, the ice, the melted water, and the fish, are all intact.

Performance, in use and after.
The FDA’s Hazard Analysis and Critical Control Point regulation recommends that companies monitor and record the temperature of their refrigerated fish while they are in transit. If fish is too hot too long, well, you know where it ends up. That paired with shipping anomalies can be a real headache for anyone shipping fish. TemperPack liners out-perform traditional EPS coolers, especially during the 48-72 hour period. So if your shipment misses an exchange, rest easy knowing your liner has a little extra insulating oomph in the final shipping stretch. Then, once your customers are done with them, they can recycle the outer shell and toss the interior insulation knowing they haven’t added any extra waste to a landfill.

Whether you ship single pieces directly to consumers or hundreds of fish to regional facilities, we can cut your shipping costs by helping you move away from unsustainable EPS coolers.

We’re keenly aware that shipping fish can be difficult. The packing process involves a lot of ice and a lot of hope that said ice holds up while in transit.

EPS coolers have long been the standard in shipping seafood. Let’s face it, they’re cheap and lightweight. But we’ve noticed a few problems with EPS coolers.

First, they take up a lot of warehouse space.
Due to their inefficient design, when they’re not in use, these coolers are still holding a lot of air in your warehouse. TemperPack liners fold flat, meaning you can ship about 8 liners in the space it takes to ship just one EPS cooler.

If they’re dropped, game over.
Let’s face it. Accidents happen. A box falls off a delivery truck, or is mishandled during packing. When a full EPS cooler falls hard enough, it cracks. Cracks mean leaks and leaks in shipping fish is bad. TemperPack liners are soft but durable, meaning if the box they’re shipped in is dropped, they might bend in the corner, but everything inside, the ice, the melted water, and the fish, are all intact.

Performance, in use and after.
The FDA’s Hazard Analysis and Critical Control Point regulation recommends that companies monitor and record the temperature of their refrigerated fish while they are in transit. If fish is too hot too long, well, you know where it ends up. That paired with shipping anomalies can be a real headache for anyone shipping fish. TemperPack liners out-perform traditional EPS coolers, especially during the 48-72 hour period. So if your shipment misses an exchange, rest easy knowing your liner has a little extra insulating oomph in the final shipping stretch. Then, once your customers are done with them, they can recycle the outer shell and toss the interior insulation knowing they haven’t added any extra waste to a landfill.

Key Features

Bio-Kraft™

TemperPack is proud to offer 100% curbside recyclable kraft paper. While most products use plastic coatings, we've developed a proprietary starch based coating that is fully repulpable in the paper recycling stream.

Custom Branding

Private labeling is available with this product. Ask us how we can help you make a statement and enhance your brand.

High R-Value

The insulation powering this product has been designed to out-perform EPS on an inch by inch basis. Performance is at the heart of what we do, and we have over 1,000,000 hours of thermal testing to back it up.

Best Products for Seafood Shipping


We are always testing our products with the offerings from current and potential new clients. Below are some of our favorite products for shipping seafood.

How It Works


Shipping your seafood with TemperPack is eco-friendly, economical, but most importantly, it’s easy.

We’ll deliver flat packed TemperPack 1-piece insulation packs to your facility.

Your warehouse workers place the TemperPack insulation packs into cardboard shipping boxes.

Fill each insulation pack with fish and ice, seal the insulation pack and close the cardboard box.

Based on your shipping timelines the TemperPack insulation keeps your fish fresh for up to 72 hours.

TemperPack Performance

We know our products will work as well if not better than what you’re currently using. Here’s some more detailed information that backs that up.

Form Factor

Compostable

1-Piece

2-Piece

2D Sleeve

Form Factor

Compostable

1-Piece

2-Piece

2D Sleeve

Empty tab. Edit page to add content here.